clamper

英

美

n.  接线板; 钳位电路；箝位器，夹持器; （防滑）鞋底钉

复数：clampers　

计算机

柯林斯词典

• 夹子;夹具;夹钳
  Aclampis a device that holds two things firmly together.
• VERB (用夹具)夹紧，夹住，固定
  When youclampone thingtoanother, you fasten the two things together with a clamp.
  1. Somebody forgot to bring along the U-bolts to clamp the microphones to the pole.
     有人忘了带把麦克风固定在支架上的U形螺栓。
• VERB 将…固定(在某处)；紧紧抓住
  Toclampsomething in a particular place means to put it or hold it there firmly and tightly.
  1. Simon finished dialing and clamped the phone to his ear...
     西蒙拨完号，把听筒贴在耳边。
  2. He clamped his lips together...
     他紧闭双唇。
  3. You beg him to try just one spoonful, and he clamps his mouth shut...
     你求他就尝一匙，可他就是不张嘴。
  4. Peter jumped to his feet with his hand clamped to his neck.
     彼得一只手捂着脖子，腾地跳了起来。
• (将违章停放的车辆扣在原地的)夹钳，车轮固定夹
  Aclampis a large metal device which is fitted to the wheel of an illegally parked car or other vehicle in order to prevent it from being driven away. The driver has to pay to have the clamp removed.

in AM, use 美国英语用 Denver boot


• VERB 给(车辆)上夹钳
  Toclampa car means to fit a clamp to one of its wheels so that it cannot be driven away.
  1. Courts in Scotland have ruled it illegal to clamp a car parked on private ground and then to demand a fine.
     苏格兰法院裁定，将停在私人地界上的车辆上夹钳并索要罚款的行为是违法的。

in AM, use 美国英语用 boot

双语例句

• The test result shows that clamper greatly increases only the first natural frequency.
  结果表明，夹板只对第一阶固有频率有较大提高。
• The Application of Small Pneumatic Clamper on Automatic Detecting System of Contactor Pressure
  小型气爪在低压断路器触头终压力自动检测系统中的应用
• After weighing is completed, the bag is automatically released from bag clamper and hanging apparatus in loaded pallet scale to pallet conveyors.
  称重完毕，夹带器及垛盘电子称上的挂袋装置将料袋释放到托盘上。
• A clamper is arranged on a tool bar of a screwdriver.
  它是在螺丝刀刀杆上设置一个夹持器。
• The problem of extreme position for two contact points of clamper is studied.
  研究了夹持器的两个夹持点在夹持物体时的极限位置问题.通过对夹持点的接触速度、加速度及其跃度的分析。
• A Detailed Discussion of the Pulse Waveform of Diode Clamper Circuits
  二极管箝位电路脉冲波形探讨
• Analysis of 8 MN tension straighten-leveller clamper unfix reason
  8MN张力矫直机拉伸夹头打滑的原因
• The second clamper is through the round hole.
  以及一第二卡体，通过于该圆孔；
• In order to solve the problem mentioned above, the clamper was improved on design and technology, so that both material and cost were saved with longer service life and higher production efficiency.
  为解决这一问题，对其进行了设计及工艺的改进，达到了节约材料、节省资金、延长使用寿命、提高生产效率的目的。
• Analysis and trouble shooting of EAF electrode arm clamper
  电炉电极夹持器失效故障分析与排除